APC Smart UPS RT 3000VA -SRT3000XLI

  • High density, double-conversion on-line power protection with scalable runtime
  • Includes: CD with software, Country-specific detachable power cord, Documentation CD, Installation guide, Removable support feet, USB cable, Warranty card
  • Output power capacity:     2.7kWatts / 3.0kVA
  • Output Connections: (8) IEC 320 C13 (Battery Backup),(2) IEC Jumpers (Battery Backup), (2) IEC 320 C19 (Battery Backup)
  • Nominal Output Voltage:     230V
  • Nominal Input Voltage:      230V
  • Input Connections:         British BS1363A, IEC-320 C20, Schuko CEE 7/EU1-16P
  • Cord Length:        2.44meters


13 People watching this product now!

Payment Methods:


Buy the APC Smart UPS RT 3000VA -SRT3000XLI from Aliscotech in Nairobi,Kenya.


Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
Scalable runtime
Allows additional run time to be quickly added as needed.
Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.


Flash upgradeable firmware
Install maintenance releases of firmware remotely using FTP.
Rack/Tower convertible
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Plug-and-Play external batteries
Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.


LED status indicators
Quickly understand unit and power status with visual indicators.
Serial connectivity
Provides management of the UPS via a serial port.
InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.
Network manageable
Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.
Customize UPS capabilities with management cards.


  • Output power capacity

    2.7 KWatts / 3.0 kVA

  • Max Configurable Power (Watts)

    2.7 KWatts / 3.0 kVA

  • Nominal Output Voltage


  • Output Voltage Note

    Configurable for 220 : 230 or 240 nominal output voltage

  • Output Voltage Distortion

    Less than 5% at full load

  • Output Frequency (sync to mains)

    47 – 53 Hz for 50 Hz nominal, 57 – 63 Hz for 60 Hz nominal

  • Topology

    Line Interactive

  • Waveform type

    Sine wave

  • Output Connections
    (8) IEC 320 C13 (Battery Backup)
    (2) IEC Jumpers (Battery Backup)
    (1) IEC 320 C19 (Battery Backup)
  • Transfer Time

    2ms typical


  • Nominal Input Voltage


  • Input frequency

    50/60 Hz +/- 3 Hz (auto sensing)

  • Input Connections

    IEC-320 C20, Schuko CEE 7 / EU1-16P, British BS1363A

  • Input voltage range for main operations

    160 – 286V

  • Input voltage adjustable range for mains operation

    151 – 302V

  • Number of Power Cords


  • Other Input Voltages

    220, 240

Batteries & Runtime

  • Battery type

    Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof

  • Typical recharge time


  • Replacement Battery


  • Expected Battery Life (years)

    3 – 5

  • RBC Quantity


  • Extendable Run Time


  • Runtime
    View Runtime Chart
  • Efficiency

Communications & Management

  • Control panel

    Multi-function LCD status and control console

  • Audible Alarm

    Alarm when on battery : distinctive low battery alarm : configurable delays

  • Emergency Power Off (EPO)


  • Available Smart Slot™ Interface Quantity


Surge Protection and Filtering

  • Surge energy rating


  • Filtering

    Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449

Customer Reviews